Peanut Shelling Machine Use Requirements

18-04-11 by

Nowadays, more and more people use peanut shelling machine to make the working process more convenient and quicker. However, many people have failed to properly grasp the use of peanut shelling machine, resulting in insufficient performance of their proper performance. Not only the quality of shelling is poor, but also their efficiency is low. In addition, there are accidents involving injuries.

As a professional peanut shelling manufacturer, in order to avoid this accident, let us introduce how to use peanut shelling machine correctly. In the following passage you may find the answer.

Peanut shelling machine using requirements:
1.Requirements for Shelling machine: Shelling clean, high productivity, high cleanliness. The loss rate is low, the breakage rate is small, the structure is simple, the use is reliable, the adjustment is convenient, the power consumption is low, and it has certain versatility. Can be used to peel shells from a variety of crops to increase the utilization of machinery.
2.Requirements for peanuts: Peanut should be suitable for dryness and wetness. Too much dryness will result in high breakage rate. If it is too wet, the work efficiency will be affected. Suitable for wet and dry shelling in winter. Before shelling, evenly spray 10 kg of warm water on the peel and cover it with a plastic film. Other seasons covered with plastic film for 2 hours, and then drying in the sun for about 2 hours to peel.
3.Requirements when using the machine: It should first check whether the fasteners are tightened, whether the rotating parts are flexible, and whether the bearings have lubricating oil. The shelling machine should be placed on a stable surface.
4.After the motor is started, the rotation of the rotor should be in the same direction as that on the implement. Let idling for a few minutes first, and observe whether there is any abnormal noise. After running normally, feed the peanuts evenly.
5.Feeding should be uniform and moderate, and iron, stone and other debris should not be contained to prevent breakage of peanuts and mechanical failure. Use a suitable sieve according to the size of the peanuts. When peanut shells increase in peanuts, the motor can be moved downwards to tighten the fan belt and increase the amount of air.
 
In addition, when the peanut shelling machine is used for a period of time and it is ready to store the machine, dust, dirt, and remaining grains in the interior of the peanut sheller should be removed, and the belt removed for further storage. Wash all parts of the bearing with diesel oil, dry it, and grease it. The machine should be covered in a dry warehouse to avoid sunlight and rain.

If you need further information about our peanut shelling machine, please contact us freely, we will do our best to cooperate with you. Our contact information is as follows:
Any problem you can contact freely,or visit website freely.
Email:Tina@machinehall.com
Phone/whatsapp:+8618539931566
skype:Tina@machinehall.com