Hummus Grinding Machine Also Used For Grinding Fruit Juice
18-02-02 by
Operational use considerations
1, join the hopper or feed pipe, and discharge mouth, or discharge circulation pipe. Connect the cooling pipe and drain pipe.
2, install the Power starter, with Ammeter and led. After the power supply, should be turned on the operation to determine the motor steering, from the feed mouth to see the direction should be clockwise.
3, adjust the gap between the two handles to loosen (counterclockwise twist) and then clockwise rotation adjustment ring, with a hand into the base of the square mouth of the rotating motor wind blades, when the rotation of the adjustment ring feel a little friction immediately stop. Reversing the adjustment ring a little more grinding gap than the alignment of the number, generally in order to meet the requirements of processing material fineness, as far as possible to make the gap between the grinding pieces. This will make the mill life a little longer. Then the handle is tightened clockwise and the adjusting ring is locked so that the gap of the grinding plate is fixed.
4, thoroughly disinfection, cleaning the body inside.
5, connected to the cooling water, start colloid Mill to run normal immediately after feeding into the grinding process. No more than 15 seconds for empty car operation.
6, processing materials are not allowed to have quartz, broken glass, metal chips hard material into the base, or into the mill will damage the dynamic, static grinding film.
7, pay attention to motor load, if found overload to reduce feeding.
8, Colloid Mill is a high-precision machinery, grinding blade clearance is very small, moving speed high, operators should strictly observe the post, according to the rules and regulations, found fault in time to stop, to eliminate the failure to use.
9, Colloid Mill after use, should be thoroughly cleaned not to make material residue machine, lest mechanical seal bonding caused leakage.
This
colloid mill hummus grinding machine also used for grinding fruit,such as apple,strawberry and so on. If you are interested in our hummus grinding machine,welcome to contact me with freely,or you can leave your email on our website,i will send the machine detail and quotation to you.
Contacts: Cara
Email: leo@machinehall.com
